A single AAA battery will keep it running for up to 10 hours
More info
With the black Tascam DR-10L Micro Portable Audio Recorder with Lavalier Microphone, you can record full-resolution dialog and speech while skipping the trouble of long cable runs and avoiding the confusion of configuring a wireless microphone system. Whether you use the included omnidirectional lavalier mic or connect your preferred lav to the Sennheiser-compatible mic input, the entire setup can be discreetly affixed to your sound source. Just over 2 x 2 inches (and only 1-inch deep), the DR-10L is ideal for videography, interviews, weddings, vlogs, and lectures where the audio equipment needs to stay out of sight.
DR-10L now bundled with iZotope RX 7 Elements
DR-10L Micro Linear PCM Recorder is bundled with a free full version of RX 7 Elements, iZotope's groundbreaking audio repair and noise reduction tool. The DR-10L/RX 7 Elements bundle brings a powerful recording and editing workflow solution to live productions where ambient noise and environmental distractions are common post production challenges, including weddings, on-location films, and documentaries, to name a few.
Features of RX7 Elements:
- Repair Assistant: Repair Assistant is an intelligent repair tool that can detect noise, clipping, clicks, and more. Solve common audio issues faster than ever by selecting the type of material (music, dialogue, other) and letting Repair Assistant analyze the audio with one listen.
- Voice De-noise: Voice De-noise can adapt to a changing noise floor for responsive, articulate vocal correction.
- De-Clip: De-clip repairs digital and analog clipping artifacts, eliminating the need to re-record your audio.
- De-Click: Polish audio recordings suffering from quality degradation and digital errors.
- De-hum: De-hum automatically identifies unwanted hum and precisely removes it for immediate clarity.
Technical info
| Recording media | microSD card (64MB to 2GB), microSDHC card (4GB to 32GB) |
| Media discharging | Push-Push type (Guard cover mounted) |
| WAV | 44.1k/48k Hz, 16/24-bit mono/poly WAV (BWF format) |
| V2.00 | |
| WAV | 44.1k/48k Hz, 16/24-bit mono/poly (BWF format) |
| MP3 | 44.1k/48k Hz, 24-bit mono/poly |
| Recording | 128k/192k bps |
| Playback | 32k to 320k bps |
| Analog audio Inputs | |
| Connector | 1/8" (3.5mm) TRS jack with screw lock |
| Microphone sensitivity | –42dBV/Pa |
| Maximum input sound pressure | 115dB SPL |
| Maximum input level | –15dBu (Gain L) |
| Minimum input level | –55dBu (Gain H+) |
| MIC input gain | +14dB to +38dB |
| Input impedance | 33kΩ (Mic bias off)/ 2kΩ (Mic bias on) |
| PHONES | |
| Connector | 1/8" (3.5mm) stereo mini jack (Dual Mono Output) |
| USB | |
| Connector | Micro-B type 4pin |
| Protocol | USB2.0 HIGH SPEED mass storage class |
| Power | 1 AAA battery (Alkaline battery/ Ni-MH battery / Lithium battery), USB bus power |
| Power consumption | 0.45W |
| Battery operation time | WAV, 48kHz, 24-bit Rec, without headphones, limiter: OFF , Dual Rec: OFF, JEITA Rec *All times are approximate. |
| Alkaline battery (EVOLTA) | 10 hours |
| Ni-MH battery (eneloop) | 8 hours |
| lithium battery (Energizer ULTIMATE LITHIUM) | 15.5 hours |
| Battery (RTC) | Lithium × 1(built in with soldering) |
| Dimensions (W×:H×D) | 2.05" × 2.19" × 0.96" / 52 × 55.6 × 24.4 mm |
| Weight | 2.2 oz. / 63 g (including battery) 1.8 oz. / 51g (excluding battery) |
| Operating temperature | 32˚F to 104˚F / 0˚C to 40˚C |
| Accessories | Lavalier microphone with microphone clip and windscreen, USB cable (A type-micro B type), Belt clip, Custom case for storing the unit and accessories included, Owner’s manual (including warranty) |
Audio performance
| Frequency response | 20Hz to 22kHz +1/–2dB (IN to PHONES) |
| Distortion | 0.05% (1kHz sine wave, at maximum input level, IN to PHONES) |
| S/N ratio | 88dB or higher (PHONES volume max, MIC GAIN L selected, IN to PHONES) |
Local Stock 
Fast Shipment 1-2d. 
Safe Purchase 
2 years Warranty 
